Raspberry Pi 4 power management board XPI – fully assembled

kr 300,00

This is the ultimate Raspberry Pi 4 power management board – called XPI.

This board supply safe power off and power on via software or via an external button. Easy to install. Guides and help are also available here on minibase.no.

This product was added to the shop in 2020 June.

 

7 på lager

Varenummer: 518040 Kategori: Stikkord:

Produktbeskrivelse

This is the 1.5 release of Raspberry Pi 4 power management board called XPI – ready to use.

This board supply safe power off and power on via software or via an external push-button. Easy to install. Just power in and power out to the Pi and a 2-wire cable to the Pi’s GPIO pins are required to operate this board.

Well written guidelines and help are also available here on minibase.no. Raspberry Pi 4 power management board is fully assembled.

All components are soldered and it’s delivered with the latest firmware on the Microcontroller (MCU). This product is supplied with 2 x high current MOSFET switch transistors with no external cooling required.

How it works

With this power management board, you can push an external button to start the Raspberry Pi 4 or if the Raspberry Pi 4 is already running, the Raspberry Pi 4 will begin the shutdown process and after the shutdown is completed the power management board will turn off all power to the Raspberry Pi 4. Or you select shutdown in the Raspberry Pi OS, the signal will be sent to the power management board and the power management board will wait for the Raspberry Pi 4 ended all it’s activity and then turn off power to the Raspberry Pi 4. Safe and secure.

Technical specifications

Input voltage 5V DC
Output voltage 5V DC
Maximum current load 5 Ampere
Power switching system 2 x AOD4184A (40V N-Channel MOSFET transistors)
Voltage stabilizer for MCU AMS1117-5.0 (Low dropout voltage regulator that also works under hazardous conditions)
MCU type ATmega328P-PU Micro Controller Unit running at 16mhz. Flashed/preprogrammed with code (source code is not available for public)

For more information please read the documentation here
A push-button and 3 LEDs are also included in the package.
External power supply with 5V DC is not included.