This is the top plate of the XVIM Standard model.
XVIM Standard FRONTPLATE P06
This is the main front of the XVIM Standard model. This STL file consists of 6 different parts to be printed separately.
XVIM Standard BOTTOMPLATE P05
This is the lower part of the XVIM cabinet.
Rev07 (22jan2022) : Fourth screw hole is finished.
XVIM Standard BACKWALL P04
The backplate of the XVIM cabinet. Easy access to the backside of the Khadas Vim’s from here. There is also an extra standard power socket to use here.
XVIM Standard LSIDEWALL P03
Left sidewall for the XVIM cabinet. Use 4 x M3 screws of 6mm length. This should have a sunken head. This part also has support for a standard 5VOLTS 40MM FAN. Please use M3 screws with about 12MM length.
XVIM Standard RSIDEWALL P02
Right sidewall for the XVIM cabinet. Use 4 x M3 screws of 6mm length. This should have a sunken head. We are working for support for the “3 buttons” on Vim later.
XVIM Standard INSERT PLATE P01
This is the main insert plate for XVIM, the standard model. This plate is designed for Khadas Vim 3 models. This release has also support for an SD Card reader and a “power-strong” external USB 2.0 port in the front. The plate is used with Khadas’s New M2X Extension board. We mean this computer has to have support for a hard disk. Remember this stl file also need part 1b and 1c. We are working with support for the “3 buttons” on Vim.
Rev26 (22jan2022) : Screw holes on the front USB port, now pass through the plate.
Rev27 (27jan2022) : Fixed error on the USB port (USB port hole too big).